CLIPPERCIDE 5-in-1 clipper blade care...

CLIPPERCIDE 5-in-1 clipper blade care and disinfectant spray, 500 ml

72131
>10
€20.87
Tax included

The formula containing isopropyl alcohol and biphenyl-2-ol combines blade disinfection with cleaning, lubrication, cooling and corrosion protection. The aerosol jet helps remove hair from between the teeth, while the lubricating film reduces friction when caring for metal clipper and trimmer blades.

 

CLIPPERCIDE treats blades when the gaps between teeth need cleaning, disinfection is required and metal parts need to run smoothly. The jet helps remove hair and dust, while the lubricating film reduces friction. Five care functions in one aerosol are practical for clipper and trimmer blades that are unsuitable for immersion in liquid.

Hair and dirt between blade teeth, friction and metal corrosion complicate tool care. CLIPPERCIDE combines cleaning, disinfection, lubrication, cooling and corrosion protection in one aerosol. Designed for metal clipper and trimmer blades and suitable metal hairdressing tools.

Key features of the clipper blade disinfection spray

  • Disinfects suitable metal blade surfaces.
  • Helps clean hair and dirt from between blade teeth.
  • Leaves a lubricating film that reduces friction.
  • Cools blades.
  • Protects metal blades against corrosion.

Practical benefits and ingredients

Isopropyl alcohol and biphenyl-2-ol are part of the disinfecting formula, while the aerosol jet supports cleaning. Cooling, lubrication and corrosion protection address different blade-care needs in one procedure. Also useful for suitable metal scissors and other hairdressing tools according to their care requirements.

Detailed description

The aerosol jet helps remove hair, dust and dirt from between blade teeth. The lubricating film reduces friction, while anticorrosion ingredients help protect the metal. Contains propan-2-ol, ethanol and biphenyl-2-ol, with propane and butane used as aerosol propellants. The product is a flammable aerosol.

How to use

Switch off the clipper and remove visible hair and dirt from the blades. Spray the blades so that the surfaces being treated are covered with product. Do not allow liquid to enter the clipper's or trimmer's electrical components, and do not spray the appliance housing. Follow the contact time and drying instructions on the label on the pack being used. Use in a well-ventilated area away from heat and ignition sources. Use biocides with care. Read the label and product information before use.

  • Before treatment, switch off the clipper or trimmer and remove visible hair and other dirt.
  • Direct the jet at the blades and between their teeth, covering all surfaces being treated.
  • Prevent liquid from entering the housing and electrical components. Use a product intended for disinfecting suitable external housing surfaces.
  • Before reusing the tool, wait for the contact time stated on the label on the pack being used and follow its drying instructions.

Technical information

  • Brand: CLIPPERCIDE.
  • Product type: aerosol for metal blade care and disinfection.
  • Formula: 5-in-1.
  • Functions: disinfection, cleaning, lubrication, cooling and corrosion protection.
  • Volume: 500 ml.

Product story

CLIPPERCIDE was conceived to combine blade-care tasks in one aerosol. Professional clippers require not only dirt removal, but also lubrication, cooling and protection of metal surfaces. The 5-in-1 formula combines these functions with disinfection to create a unified blade-treatment procedure in hair salons and barbershops.

The spray helps clear hair and dirt from between blade teeth. The lubricating film reduces friction, while corrosion protection complements care of metal components. The same formula also cools the blades. Its practical value lies in combining functions: blade care does not require a separate product for each of these tasks. CLIPPERCIDE is designed for professional metal tools; correct application and the full contact time specified on the label form the basis of blade treatment.

Related products

BARBICIDE disinfectant wipes are intended for suitable external clipper housing surfaces, subject to the appliance's care instructions. For tools that can be fully immersed, the BARBICIDE range offers concentrate and glass disinfection jars.

Frequently asked questions

What are the five functions?

Disinfection, cleaning, lubrication, cooling and corrosion protection.

Is it only a cleaner?

No, the aerosol also provides disinfection and other metal blade-care functions.

Should hair be removed before application?

Yes, remove visible hair and dirt before disinfection.

Additional product, usage and safety information

CLIPPERCIDE® aerosol

Why use 3 different products when one easy-to-use, economical and proven product meets all your needs? For metal clipper blades and tools, this 5-in-1 formula disinfects, lubricates, cleans, cools and prevents rust in 10 minutes or less.

CLIPPERCIDE® high-pressure aerosol blows away hair, dirt and skin particles while professionally disinfecting and lubricating clipper blades. It reduces cutting-head wear caused by excessive friction and keeps blades sharp at all times. A special anti-rust formula also protects blades and extends clipper service life.

CLIPPERCIDE AEROSOL – SPRAY

Aerosol for disinfecting hairdressing accessories such as clippers, trimmers, razors, scissors and combs. It has bactericidal, fungicidal and yeasticidal activity.

For professional use!

Product type:

2. Disinfectants and algaecides not intended for direct application to humans or animals.

Directions for use:

Shake well before use. Remove visible dirt from the surfaces to be disinfected and wash them. Spray items and accessories from 20–30 cm away until covered with product.

Bactericidal, fungicidal and yeasticidal activity is achieved within 10 minutes.

Active substances:

propan-2-ol CAS: 67-63-0, EC: 200-661-7 content: 33,65 g/100 g

ethanol CAS: 64-17-5, EC: 200-578-6 content: 6,19 g/100 g

biphenyl-2-ol CAS: 90-43-7, EC: 201-993-5 content: 0,30 g/100 g

Safety information:

DANGER

Safety information

Contains: propan-2-ol

H222 Extremely flammable aerosol.

H229 Pressurised container: may burst if heated.

H319 Causes serious eye irritation.

H336 May cause drowsiness or dizziness.

H412 Harmful to aquatic life with long lasting effects.

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

P211 Do not spray on an open flame or other ignition source.

P273 Avoid release to the environment.

P251 Do not pierce or burn, even after use.

P261 Avoid breathing spray.

P271 Use only outdoors or in a well-ventilated area.

P280 Wear eye protection.

P312 Call a POISON CENTRE/doctor if you feel unwell.

P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/ 122 °F.

First aid: seek medical advice in cases of misuse, symptoms or adverse reactions. If inhaled: provide fresh air. Skin contact: wash affected areas thoroughly with water. If in eyes, immediately rinse with plenty of running water for 10–15 minutes, keeping the eyelids open. Get immediate medical attention. Remove contact lenses, if present and easy to do. Continue rinsing. If swallowed: rinse the mouth with water and drink plenty of water. Do not induce vomiting.

Waste disposal:

Take used product and packaging to an authorised hazardous-waste disposal facility.

Inventory number holder

DJR Polska Sp. z o.o.

ul. Lwowska 11

37-700 Przemyśl (Poland)

Telephone: +48 16 675 29 50

UFI: YC00-Y0KY-S00E-F6EM

Volume
401-850ml
Properties
Antibacterial
Antifungal
With cooling effect
Usage
For professionals
Product type
Sprays

About BARBICIDE

BARBICIDE originated in the USA in 1947, when Maurice King developed its original disinfectant. The distinctive blue solution became a familiar feature in hairdressing salons and barbershops. Associated with King Research, the brand specialises in cleaning and disinfection for professional beauty environments.

What is BARBICIDE known for?

The brand focuses on hygiene for reusable instruments, accessories and work surfaces. Available formats include concentrates for preparing a working solution, ready-to-use sprays and immersion jars. The right choice depends on the item being treated, its material and the instructions for the individual product.

Cleaning and disinfection have separate roles in a salon routine. Cleaning removes visible dirt and product residue; a disinfectant must be used for its specified purpose. Instructions for one product should never be applied automatically to the entire range.

BARBICIDE products

Instrument disinfectant concentrates

When choosing instrument disinfectants, check that the product is intended for the instrument and material concerned. A concentrate is diluted to make a working solution according to the manufacturer's instructions. Suitability for scissors, combs or other accessories must be checked in the individual product information.

Surface disinfection

Ready-to-use sprays are intended for treating salon work surfaces. Browse surface disinfectants to compare products intended for this task. Before buying, check the permitted applications and material compatibility, particularly for painted, plastic or other sensitive surfaces.

Instrument immersion jars

BARBICIDE glass jars help organise instrument disinfection. When selecting instrument disinfection jars, compare their capacity with the size of the instruments. The jar is an accessory: the disinfection process also depends on using an appropriate product correctly.

Ship-Shape cleaners

Ship-Shape is designed to clean surfaces and equipment, including the removal of styling product residue. It addresses the particular cleaning demands of salon work. Cleaning and disinfection are distinct stages of the hygiene routine.

Who are BARBICIDE products for?

The range is intended for hairdressers, barbers, beauty therapists, nail technicians and salon managers choosing workplace hygiene products and accessories. Start by identifying the task: instrument immersion, work surface disinfection or equipment cleaning. Then consider ease of use and the material compatibility specified in the instructions.

Use biocides safely. Always read the label and product information before use. Dilution, contact time and working solution replacement frequency depend on the instructions for the individual product.

Customers who bought this product also bought:

Grade Comments (0)

No customer reviews for the moment.
Product added to wishlist
Product added to compare.

Websites, including online stores, use cookies to provide the best and fastest service. Cookies collect anonymous data about visits to the site and help create a more convenient user experience. We use cookies. By using this website, you confirm that you understand and agree to the use of cookies on your device.