CHEMOFORM pH-Minus pool pH reducer...

CHEMOFORM pH-Minus pool pH reducer granules, 1.5 kg

71953
>5
€12.70
Tax included

Fast-dissolving granules lower excessively high pH, helping create suitable conditions for water disinfection. The chloride-free granules are designed for manual dosing. Gradual addition and repeated testing let you tailor pH adjustment to your pool water.

 

CHEMOFORM pH-Minus is a pool water pH reducer in a 1.5 kg pack. The fast-dissolving granules are used when the measured pH is too high.

The main ingredient is sodium hydrogen sulphate, an acidic substance used to adjust water pH. It lowers the pH of excessively alkaline pool water, preparing it for more effective disinfection. The granules dissolve quickly, contain no chlorides and are intended for manual addition after dissolving in water.

Correct pH adjustment helps reduce conditions that encourage limescale precipitation and hard deposits. Adding the product in stages lets you account for how your pool water responds, as hard and soft water may need different quantities to achieve the same pH change. The product adjusts the water's chemical balance and does not replace disinfection.

pH reducer for balanced pool water

  • Lowers water pH to correct an excessively high reading.
  • Fast-dissolving granules for manual dosing.
  • Chloride-free formulation.
  • Gradual addition allows the dose to be adjusted after repeat tests.

How to use

Measure the water pH. Add the required granules to a container already filled with water and dissolve. Add the solution in portions, distributing it evenly around the pool while filtration is running. Recheck pH between additions. Determine the dose from the label instructions, pool water volume and water hardness. Read the label before use and follow the protective measures specified.

Adjusting pH in stages

  • Establish the initial reading. Measure the pH and determine the pool water volume. Use the product only if pH needs to be lowered. The recommended pH range is 7.0–7.6, taking the requirements of the specific water care system into account.
  • Calculate the guide quantity. Approximately 150 g per 10 m³ lowers pH by 0.2 units. For the same adjustment in 1 m³, the guide quantity is 15 g. This is an initial estimate: hard water may need more product and soft water less.
  • Prepare the solution. Fill the container with water first, then add the measured granules. Dissolve them before adding to the pool. Never pour water onto concentrated product.
  • Make adjustments in stages. While filtration is running, pour the solution slowly around the pool edges, avoiding the area around metal fittings. Do not add the entire calculated amount at once if a larger pH change is required.
  • Check the result. Allow the water to circulate between adjustment stages and repeat the test. Staged treatment can be carried out at intervals of approximately four hours. Determine the next dose from the new reading and label instructions to avoid lowering pH too far.

Do not mix with other chemicals. Wear protective gloves and eye protection as instructed on the label.

Technical information

  • Brand: CHEMOFORM
  • Product: pH-Minus Granulat
  • Form: Granules
  • Net weight: 1.5 kg
  • Manufacturer code: 0811001
  • EAN / GTIN: 4029156081110

The product story

Thoughtful pool care starts with balanced water. The pH indicates whether water is acidic or alkaline and affects the action of disinfectants in pool water. CHEMOFORM pH-Minus granules are designed for a specific correction: lowering excessively high pH. This adjustment is one stage in a consistent daily pool care routine.

The fast-dissolving granular form is intended for manual dosing. First test the water, then make the required adjustment and test again. Water hardness also matters: it affects the amount needed and how pH responds. Every treatment therefore reflects the condition of the particular pool water.

Alongside pH adjustment, CHEMOFORM's approach to water care includes disinfection, algae control and clarification. Within this system, pH-Minus has a clear purpose: lowering excessively high pH. It helps pool owners establish an understandable care routine guided by measurements, with granules added gradually as needed.

Frequently asked questions

When should a pH reducer be used?

When a water test shows that pH is too high.

Should the granules be dissolved first?

Yes. Add the granules to water in a separate container and dissolve before distributing evenly in the pool.

Does the product contain chlorides?

No. pH-Minus granules contain no chlorides.

Weight
1000- and more gr

About CHEMOFORM

CHEMOFORM is a German pool water care brand established in 1962. It specialises in water treatment products for private and public swimming pools. Its range covers water balance, disinfection, algae control, clarification and cleaning.

These product groups support a structured maintenance routine. Regular water care, adjustments to individual water parameters and periodic cleaning require different treatments. Before choosing a product, check its intended use and compatibility with your pool or spa equipment.

What is CHEMOFORM known for?

The brand’s approach centres on water analysis and accurate dosing. Water conditions are assessed first, then a treatment is selected to address the identified need. This makes measured water values the starting point for product selection and maintenance planning.

Compare products by function as well as pack size and format. Granules, tablets and liquids may have different applications and dosing methods. Instructions for one product should not be applied to another simply because both belong to the same category.

CHEMOFORM products

Disinfection and water balance

Disinfectants are intended to maintain water hygiene. Water balancers adjust specific parameters, such as pH. These product groups perform different tasks, so a pH adjuster does not replace a disinfectant.

When comparing options, consider the treatment purpose, water volume and application frequency. Determine the dose from the individual product label and water test results. Even products with a similar appearance may have different application requirements.

Algae control, clarification and cleaning

The CHEMOFORM range also includes products for algae control, improved water clarity and pool cleaning. These complement routine water care, with each group serving a specific purpose. If water becomes cloudy, foam develops or deposits appear, assess the possible cause before selecting a treatment.

For spa maintenance, browse the hot tub water care products category. Check the product description to establish whether a treatment is intended for warm spa water, pipework or another part of the system. Products in the same category may have different applications.

Who are CHEMOFORM products suitable for?

The range is relevant to private pool owners and professionals responsible for public swimming pools. Spa and hot tub owners should choose products specifically intended for their system.

Before buying, establish whether you need routine disinfection, water balance adjustment or cleaning. Compare the product’s function, application requirements and pack quantity with the maintenance task and your ongoing pool or spa care plan.

You might also like

Customers who bought this product also bought:

Grade Comments (0)

No customer reviews for the moment.
Product added to wishlist
Product added to compare.

Websites, including online stores, use cookies to provide the best and fastest service. Cookies collect anonymous data about visits to the site and help create a more convenient user experience. We use cookies. By using this website, you confirm that you understand and agree to the use of cookies on your device.