Mask SKEEN LED for facial and eye areatreatment

Mask SKEEN LED for facial and eye area skin rejuvenation.

SKEEN TECHNOLOGIES, powered by LED light, is recommended and used by dermatologists and cosmetologists around the world. Thanks to the LED light procedure, depending on the color of the light and the wavelength of the emitted light, a significant positive effect on the skin can be achieved. LED emits photons with a certain wavelength that are absorbed by cells, effectively reducing facial wrinkles, fine lines, acne and preventing sunburn.

SKEEN technologies promote collagen production, making the skin smoother and more youthful.

SKEEN LED facial and eye mask is made of liquid silicone, using the world's first injection technique directly into the mask-shaped mold in the production process.

Main features of the mask: IP67 waterproof, made of liquid silicone, easy and convenient to use, excellent comfort properties, foldable and portable, very durable - practically indestructible.

Benefits of LED Light Therapy

The LED Beauty Mask uses specific wavelengths of light to penetrate deep into the skin, stimulating cell renewal, improving blood circulation, and promoting collagen and elastin production.

The mask helps:

⁃ Reduces acne;

⁃ Smoothes wrinkles and reduces fine lines;

⁃ Detoxifies and soothes the skin;

⁃ Improves skin elasticity;

⁃ Brightens and evens out skin tone;

⁃ Soothes sensitive skin;

⁃ Accelerates wound healing and reduces inflammation;

Light therapy modes:

• Near infrared (850 nm) + red light (630 nm): Stimulates collagen and elastin production, improves skin elasticity, evens out skin tone, reduces fine lines and wrinkles, and prevents pigmentation problems.

• Yellow light (590nm): Soothes sensitive skin, inhibits melanin production, brightens complexion, promotes absorption of skincare products, and improves redness and capillary dilation.

• Blue light (415nm): Eliminates acne-causing bacteria, reduces inflammation, refines the appearance of pores, and helps manage oily and acne-prone skin.

How to use:

1. Controller overview

2. Charging the controller:

Fully charge the controller before first use.

The indicator light will flash during charging.

When all lights are solid and no longer flashing, the controller is fully charged.

After charging, unplug the controller.

Do not use the mask while charging.

Use only the USB cable provided to avoid malfunction.

3. Using the mask:

Make sure the outer surface of the mask is facing you. Pull the Velcro strap through the left ear hole and secure it.

Pull the other side of the strap through the mask, adjust for a comfortable fit, and secure it.

If you have a ponytail, wear the mask from the top of your head, adjusting the bridge of your nose for comfort, threading it through the strap hole.

Adjust the strap as needed to ensure the mask fits snugly but comfortably.

4. Connecting the mask to the controller:

Connect the mask to the controller using the included cable.

5. Power on/off

• Press and hold the power button for 1.5 seconds to turn on the device.

The display screen will light up.

6. Mode selection:

Press the "M" button to switch between light therapy modes: red, blue or yellow light.

Once the mode is selected, the timer will start automatically.

Red light - 850nm+630nm

Blue light - 415nm

Yellow light - 590nm

7. Energy intensity level adjustment

• Short press the power button to cycle through the three energy levels.

The higher the level, the brighter the light and the stronger the treatment.

Recommendation:

Start with the lowest level for the first time use.

If your skin is not sensitive, gradually increase it to a higher level.

Sensitive skin should use the lowest setting.

8. Setting the treatment duration

Press and hold the "M" button for 1.5 seconds to set the treatment duration.

Choose 10, 15, 20 or 30 minutes.

We recommend using the mask for 10 minutes every day, no more than 30 minutes per day.

You can also combine treatments, such as 10 minutes in red light, followed by 10 minutes in blue or yellow light.

Steps for safe use.

1. Sensitivity test:

Before your first treatment, perform a sensitivity test:

Place the device on the inside of your hand.

Turn on the device and perform a 10-minute treatment.

If you feel any discomfort, stop immediately.

Wait at least 6 hours after treatment. If redness or itching occurs, do not use the mask on your face.

2. Starting the treatment.

Cleanse your face and remove all makeup. You can use a toner, but avoid light-sensitive or bleaching products.

Firmly attach the mask to your face.

Connect the mask to the controller.

Press and hold the power button for 2 seconds to turn on the device, select your mode and start the treatment.

After treatment, follow your normal skin care routine.

Recommended use: 3-5 times a week, starting every other day.

Cleaning and Maintenance:

• Clean the mask before and after each use with a soft, dry cloth or damp cloth.

• The mask can be rinsed under running water, but make sure the controller is unplugged.

• Do not rub or twist the mask with force.

• Store the device in a dry environment, away from direct sunlight.

Safety Precautions:

• Not suitable for children, pregnant or breastfeeding women, or people with severe melasma or skin conditions.

• Avoid combining strong exfoliants or acne treatments with light therapy.

• Discontinue use immediately if you experience itching, swelling, or irritation. Consult a doctor if necessary.