Binds iron, copper and other metal ions, helping prevent related pool water discolouration. Also acts on metal and limescale deposits on pool surfaces. Suitable for treating metal-containing well water in pools alongside filtration and filter maintenance.
CHEMOFORM Metall-Ex metal remover binds and removes metal ions from pool water, including pools filled with well water. The liquid product in a 1 l pack also helps treat metal and limescale deposits.
It contains 1-hydroxyethane-1,1-diphosphonic acid (HEDP), a phosphonate compound. The product treats inorganic deposits formed by iron, copper and calcium compounds and binds metal ions in water. It is particularly useful in pools filled with metal-containing well water where unwanted discolouration appears after disinfection.
Metall-Ex treats metal and limescale deposits in both filled and empty pools, so treating deposits does not always require draining the pool. It also lowers total water hardness associated with calcium content. Its action targets inorganic deposits; organic dirt requires a different product suited to that task.
Metal remover for metal and limescale deposits
- For treating iron, copper and other metals in pool water.
- Helps prevent metal-related water discolouration.
- Acts on metal and limescale deposits on pool surfaces.
- Liquid product added while the filtration system is running.
How to use
Before treatment, check pH and follow the conditions on the Metall-Ex label. Add evenly while filtration is running, selecting the dose according to water volume. After treatment, clean the filter as instructed by its manufacturer and check pH again. Do not mix the concentrate with other chemicals. Read the label before use.
Treatment in a filled pool
- Prepare the water. Measure pH before adding the product: it must be above 7.5 at the start of treatment. Follow the specific product label and pool equipment requirements.
- Measure the dose. The guide dose for metal ions and deposits is 0.3–0.6 l per 10 m³ of water. Reduce the amount proportionally for smaller water volumes. Select the dose according to the label and the treatment required.
- Distribute evenly. With filtration running, pour the measured product over the water surface. Do not mix the concentrate with other water care products.
- Continue filtration. Keep the filtration pump running for at least 48 hours. Then backwash the filter if its design allows, or clean it according to the equipment instructions.
- Restore water balance. Recheck pH and, if necessary, adjust it to between 7.0 and 7.6 in accordance with the water care system requirements.
Treating deposits in an empty pool
Treat the affected surface with a cloth moistened with the product, allow it to act and rinse with water. Wear protective gloves and eye protection. Read the label instructions and follow the care requirements for the particular surface material before treatment.
Technical information
- Brand: CHEMOFORM
- Product: Metall-Ex
- Form: Liquid
- Volume: 1 l / 1000 ml
- Application: Metal ions and inorganic deposits in pools
- EAN / GTIN: 4029156109111
The product story
Pool water discolouration can have different causes, so choosing the appropriate treatment matters. Metals in water, for example from a well, may cause unwanted colour changes when they come into contact with disinfectants. CHEMOFORM Metall-Ex is designed for this specific water care task: binding and removing metal ions.
It is part of CHEMOFORM's range of specialist products that complement daily pH adjustment and disinfection. This approach helps match treatment to the cause of the problem. Metall-Ex also acts on metal and limescale deposits, addressing both the water and pool surfaces.
In practice, the product combines chemical treatment with filtration. Water circulation, filter maintenance and subsequent pH checks are all part of the process. It offers pool owners a targeted response to metal-related discolouration and mineral deposits using a product designed for that particular problem.
Frequently asked questions
Is Metall-Ex suitable for treating well water in a pool?
Yes. It is used to bind and remove metal ions, including in pools filled with well water.
Is it only for iron?
No. It also treats copper and other metals, as well as limescale deposits in pools.
What is the pack volume?
The pack contains 1 l, equivalent to 1000 ml.
- Volume
- 851- and more ml
About CHEMOFORM
CHEMOFORM is a German pool water care brand established in 1962. It specialises in water treatment products for private and public swimming pools. Its range covers water balance, disinfection, algae control, clarification and cleaning.
These product groups support a structured maintenance routine. Regular water care, adjustments to individual water parameters and periodic cleaning require different treatments. Before choosing a product, check its intended use and compatibility with your pool or spa equipment.
What is CHEMOFORM known for?
The brand’s approach centres on water analysis and accurate dosing. Water conditions are assessed first, then a treatment is selected to address the identified need. This makes measured water values the starting point for product selection and maintenance planning.
Compare products by function as well as pack size and format. Granules, tablets and liquids may have different applications and dosing methods. Instructions for one product should not be applied to another simply because both belong to the same category.
CHEMOFORM products
Disinfection and water balance
Disinfectants are intended to maintain water hygiene. Water balancers adjust specific parameters, such as pH. These product groups perform different tasks, so a pH adjuster does not replace a disinfectant.
When comparing options, consider the treatment purpose, water volume and application frequency. Determine the dose from the individual product label and water test results. Even products with a similar appearance may have different application requirements.
Algae control, clarification and cleaning
The CHEMOFORM range also includes products for algae control, improved water clarity and pool cleaning. These complement routine water care, with each group serving a specific purpose. If water becomes cloudy, foam develops or deposits appear, assess the possible cause before selecting a treatment.
For spa maintenance, browse the hot tub water care products category. Check the product description to establish whether a treatment is intended for warm spa water, pipework or another part of the system. Products in the same category may have different applications.
Who are CHEMOFORM products suitable for?
The range is relevant to private pool owners and professionals responsible for public swimming pools. Spa and hot tub owners should choose products specifically intended for their system.
Before buying, establish whether you need routine disinfection, water balance adjustment or cleaning. Compare the product’s function, application requirements and pack quantity with the maintenance task and your ongoing pool or spa care plan.
Grade Comments (0)